Wednesday, January 14, 2009

Diaper Clutch Tutorial

It's finally here.

First: all the disclaimers. (My husband hates when I do this.)
Admittedly, this is my first ever attempt at a blog tutorial, so it's far from perfect. My camera is not stellar and some pictures look worse than I thought they did when I first took them. Hopefully they're good enough you'll at least get the general idea. I'll try to replace them eventually.

I would welcome any feedback - or questions if you need clarification - of any part of the process so that I can make this as helpful as possible to anyone in the future.

With that, here goes.
Quick recap: What is a diaper clutch?
(aka a fabric diaper case. Is" diaper clutch" trademarked?)

A handy (and stylish!) little pouch to compactly store a spare diaper or two and package of wipes, particularly when you're sick of carrying a diaper bag but you're still in need of these critical supplies. This serves a couple of purposes: to keep diapers from getting squashed and wadded-up at the bottom of your purse, and makes it more convenient to hand all the supplies over to your husband at once when you're out in public and a diaper needs changing! :)

Getting started:
(Before you start, I always suggest reading through the whole tutorial to get an idea of what you'll be doing. Cut's down on the mistakes. Also might not be a bad idea to make a practice clutch first before you cut-up your favorite Amy Butler fabric.)

Supplies: 8"x 23" piece of two coordinating fabrics
2" of velcro


From outer fabric cut: one piece 8"x 10" and one piece 8"x 13"
From lining fabric cut: one piece 8"x 10" and one piece 8"x 13" (same as outer fabric)

Pin the 'loop' side of the velcro to the front of the smaller outside fabric.
I measured 3" in and 2 1/2" down. [see picture]

Then pin the hook side of the velcro to the large piece of lining fabric - 3" in and 1" down.Sew on the velcro. (Sew it securely - don't forget to back stitch.)
To create the closure flap, I then stacked the two large coordinating fabrics back to back with the smaller front fabric on top, lining up the bottom edges. Line up your ruler at point *A -the top of the front of the clutch - and move the ruler in one inch on the diagonal to point *B.
Cut
Repeat on the other side. (Ignore my pinned velcro.)

(This part of the process is far less critical and there's room for lots of variation here, so feel free to be creative.)

Round of the bottom edges. I used a really high-tech tool called an upside-down-applesauce-cup.
Match-up fronts and backs of outside and lining fabrics, lining-up bottom edges. Sew together front and back of each group around the sides using a 3/8" seam allowance. Clip curves.
Trim the lining fabric closer to the seam.
Turn the lining fabric right-side-out and put it inside the outside fabric pouch so that right-sides are matched-up together.
Pin around the flap and inside edges. Starting from about 1.5" from the right seam stitch the lining and front fabrics together around the top of the front of the bag and around the flap edge.
(You are going to use the area left open for turning the bag right-side out and will later top-stitch it closed.)
This is the trickiest part. When sewing you're going to put the throat of the machine 'inside' the 'inside-out' bag. I used a 3/8" seam. [Sorry about the bad picture!]
This is what the stitching will look like when it's done.
Clip top corners.
Turn both bags right-side out through the opening and tuck the lining inside the outer bag.
Carefully press the top flap.
and top-stitch around the outer edge of the bag and flap, closing the opening used for turning right-side-out.
Voila. A lovely baby gift. Here is mine with a coordinating nursing cover. A long over-due gift for a friend. Finally done! And so is this tutorial.


38 comments:

Nedra said...

I think you did a great job on your tutorial! Thank you! I'm looking forward to making a few of these.

Laurie, the girls and Scott said...

Wow! Thanks so much! I am making these soon. I'll let you know how it goes.

Lisa said...

are tutorials supposed to be funny?... the applesauce cup definitely made me giggle a bit!
it looks great Amy!

casserole said...

Great tutorial! I posted a link on Craft Gossip Sewing Blog: http://sewing.craftgossip.com/tutorial-sew-a-diaper-clutchtutorial-sew-a-diaper-clutch/2009/03/30/

--Anne

Anonymous said...

I made one for myself! It's awesome. The tutorial was super easy to follow, thank you! I might make a bigger one for when the diapers get a little bigger, mine fit 4 size 2 diapers perfectly.

Blogful said...

This is my favorite shower gift lately. Just made one the other day, but your tutorial makes it so much easier. THANKS!

Three Dancing Magpies said...

Can't thank you enough for this. I love it! Just made one for an upcoming shower and am thrilled. I think I will make a few more tonight for myself, my twins diapers are always a crumpled mess and the original ones I had purchased don't fit their current size four diapers! Thanks again, the tutorial rocked!

summersolstice2008 said...

I am working on one now and I can only hope it turns out as good as yours. I posted a link on www.triadmommies.com

Rhiannon's Mom said...

Hi Amy,

I found you from May Giveaway Day hosted by Sew Mama Sew and so glad that I did. This tutorial is great and I was able to make the clutch in less than an hour. Being the newbie sewer that I am, the only difficulty that I had was sewing the lining flap and the opening (before you flip it inside out). I was confused: do I sew the from the start line to the side and stop then sew around the flap or do I sew a continous stitch? Can you describe how to sew it? Or possibly post a better picture?

I wanted one of these diaper clutches and I thank you for posting a tutorial.

amy smart said...

Hi there Rhiannon's Mom. Not sure how to contact you, so hopefully you'll see this.

That is definitely the trickiest part of the process - and the hardest to demonstrate with out video. Maybe I should add video? Hmmm, that would be a good idea. But to answer your question, yes, you do sew one continuous stitch all the way around the front, sew 3/8" past the front, raise the foot, pivot the needle, continue sewing up the flap with that 3/8" seam allowance. When you get level with 3/8" away from the front, lift the foot, pivot the needle again and sew about an inch and a half across the front, leaving that opening for turning right side out. After it's turned right side out and if it puckers funny at those pivot corners, I sometimes go back and un-pick a few stitches, turn right-side out again, press and then the top-stitching holds everything in place.

I definitely recommend making a practice one first. After you see how it comes together once, it's way easier the following times.

I hope this helps. Thanks for the feed-back. I really appreciate it. I'll work on changing that. Good luck and have fun!

Amy

michellejohnnie said...

I'm excited to make one of these! Thanks! I linked to it!

keren said...

great tutorial! thanks!
just made one for a not-so-close relative who is giving birth at this very moment :)

Carla said...

Great! Thanks. I'm going to make one today to go with a few other gifts I made my daughter.

Carrie said...

Thanks this was a greta tutorial, mine turned out so cute!

Rachel said...

Thank you! I have been scouring the internet on and off all day for a great tutorial. I can't wait to make mine now!

Lynette said...

Great tute. I have just enough left over fabric from a carseat canopy to make a matching diaper clutch for a friend. Perfect tute. Thanks!

Valerie said...

Thanks for the tutorial! I just made my own with a little strip of fabric across the front as well. Your pattern worked perfectly and fits just the necessities!

I posted photos here if you want to take a look!

http://thecraftyclassroom.com/blog/2010/03/26/clutch-diaper-clutch/

Blessings,

Valerie

Nicole said...

How did you make the nursing cover? I'd love to make a coordinating set! Thanks for the wonderful tutorial and inspiration!

Maren said...

SUPER cute pattern! I made one in about an hour yesterday morning before a baby shower at noon! Thanks for the pics and super easy instructions! Love this blog! I'm LDS too! :)

tarabu said...

. . . . and it's a great shower gift for those families working on their umpteenth baby!

Sarah said...

This is a great tutorial! I just linked to it on my blog. I've got a little one on the way and the older one is still in diapers. This would sure be helpful so I'm not lugging around 2 bags!
-Sarah from Create Studio
www.createstudio.blogspot.com

Skye said...

Thanks Amy for the awesome Tutorial. Just found it the other day even though you posted it over a year ago... how cool is that?! I also linked to you over on my blog. :)

Simple Sweetie said...

Hi

Thanks for sharing this tutorial. It is great for a beginner like me. I have made one for myself today and I will make more for my friends.

Crystal said...

I was trying to figure out how to create a diaper clutch on my own and decided I should just search for a tutorial. Your photos and instructions were just what I needed for getting over the mental block that was keeping me from starting!
I'm posting what I created on my blog tonight and linking back to you.
Thank you - thank you - thank you!

littlegirlsandpolkadots.blogspot.com

Inbal said...

Hi - love this diaper clutch! Very easy to make. I just had one comment - I thought the lining should be a hair smaller than the outer pouch. I made it following your instructions and the lining is bunching up too much. Has anyone else had the same issue? This happens to be one of my first sewing projects, so I could be doing something wrong... Other than that one issue, it came out really pretty! Thanks for sharing the tutorial!

Stacey said...

Thanks so much for this tutorial! I am making so many of these for it seems all my family is having babies this year. :) I'm learning a lot along the way, but you definitely wrote the tutorial for us beginners. :D Thanks!!

Kathleen said...

Thanks for this tutorial!! i just got into sewing and this is super easy to do. Thanks!

Lisa F (NJ) said...

Awesome tutorial! Thank you, and I am just now reaching the stage where all I want to carry is a diaper or two, and the wipes. Great timing!!!! Thanks

Anonymous said...

I found that it helped to stop stitching the side seams about 3/8" from the top. That helped not to get the bunching when stitching the 2 pieces together.

tammyr said...

I just made one of these and LOVE the idea and pattern!!! You did a great job with explanations. Thanks

texmex said...

This works as well for my IPAD if I move one of the velcro. Super.

texmex said...

Just finished it and found that on the next one I will put the velcro on the top fabric, sideways (90degrees), in order to allow the pouch to close even if you put longer item (like the ipad!). I cut 2 sets so it will be for the next one. Thanks for the pictures, and the tutorial.

Anonymous said...

Great instructions! I have made a few of these and have been happy with the way they turned out. Fat quarters are perfect if you want a pouch that is a little larger to grow as the diapers do! Thanks for the tutorial!

delish-designs.com said...

This is so awesome! I have been looking for a cool gift to make my cousin for her baby shower and I think this is it! Looks amazing and not too difficult to make.

Katie said...

I just made one for a friend, and it was a cinch for this very-beginner sewer! Thanks for the great tutorial--it's a perfect gift for an acquaintance!

Meredith said...

What a great tutorial! I just featured it on Favorite Pins Friday at Wait Til Your Father Gets Home. http://www.waittilyourfathergetshome.com/2012/05/26/favorite-pins-friday-2/

Lauren Bonsall said...

Just made this for my son's preschool tote-bag. Thanks so much for the tutorial :)

Laura Martín said...

Hi!
I'm not speak English very well but I understant the tutorial!!! I did the quilterthe diaper yesterday and it's very easy!!!!
Thank you Amy!