Saturday, October 15, 2011

Quilting tip: Scant 1/4 inch

As you know, a 1/4" seam allowance is the gold-standard in quilting.  Keeping your seam allowance consistent is an important key to good-looking quilts but using a scant 1/4" seam is even better. Let me explain.

Typically lining up the edge of your fabric with the right side of your presser foot is a good guide for keeping your seam allowance consistent.  You can buy a specific quiter's foot with a 1/4" seam allowance for your machine (newer ones may come with it) but if you're like me, I didn't want to spend the extra money and it seemed close enough.  Then I took a class from Leslie Ison where she explained how much more effective it is to use a scant 1/4" when pieceing - especially when you are piecing a more complex block.

Above is are two seams on either side of a drawn line. On the right I just used my regular presser foot with the needle centered. On the left I adjusted my needle one space to the right and still used my regular presser foot.
Here is the difference. On the right you can see that the seam allowance is actually slightly bigger than 1/4". On the left you can see that the seam lies just slightly inside the 1/4" line. This, my friends, is a scant 1/4".

So get out your ruler and measure your seam allowance.  Making adjustments may be as simple as moving your needle one notch to the right, but sewing with a scant seam allowance will make a difference in your piecing. Especially if your piecing smaller, detailed blocks - like those cute Farmer's Wife blocks. Give it a whirl and let me know if it makes a difference for you.

38 comments:

  1. Nice of you to draw the 'scant' to attention - I've just recently started using it and is much more successful - very accurate!
    Hugs - Lurline♥

    ReplyDelete
  2. This makes sense to me - amazing - I'm gunna give it a go! Thanks for the tip!

    ReplyDelete
  3. Thank you. I have always wondered what that meant. Being a new sewer, I've never really had to come across anything that required it, but I have heard/read it in passing. :)

    You're so good to us! Thank you for sharing.

    ReplyDelete
  4. Yep...it took me many years to figure that out...one little move of the needle over and it's amazing what a difference it makes!

    ReplyDelete
  5. Hrrrmmmppph. My needle doesn't move to the right. Just one giant step to the left for zippers and whatever else you sew all the way over there. I do have a 1/4" foot, but I don't think I am as consistent with my seam allowance with it. But my regular foot is a little over 3/8" seams... which ends up being really big! Hmmm... must find a new solution!

    ReplyDelete
    Replies
    1. Measure out 1/4" from your needle. Then place a piece of tape on your machine bed, so that guiding fabric along the edge of the tap ewill allow you to achieve a seam that is just slightly less than the 1/4".

      Delete
  6. Excellent advice! Once I worked out the difference my piecing skilled improved 10 fold. Good piecing = a happy quilter :o)

    ReplyDelete
  7. This works out great because when you have to press, that scant part is the fold from the seam to the top over the seam allowance bulk. It works really really well when you have lots of points you don't want cut off as well.

    ReplyDelete
  8. I`ve just bought a new machine and the quilter`s kit came with a quarter inch foot - is this the same as a scant seam? Before, I used to use a line of masking tape on the machine as I wasn`t able to move the needle right or left.

    ReplyDelete
    Replies
    1. No, chances are it will give you a regular 1/4" seam or maybe even a bit more than that, just as the author of the blog found when she tried her's out. Just move your needle to the right a notch. That should do it. Move the needle over and test your 1/4" foot with it. If you end up with just slightly less than 1/4", you will have the 'scant' 1/4" seam.

      Delete
  9. Thank you for this tip-- I think its a great piece of advice that I'm going to try!

    ReplyDelete
  10. I discovered this recently (and actually have it on a post-it stuck to the machine, I'm that much of a dork) and it works so well!

    ReplyDelete
  11. Thanks for this tip, I'm just about to start working on a block for a block of the month and was reluctant because I didn't love home my Farmer's Wife blocks looked! Will definitely try this!

    ReplyDelete
  12. I have been sewing for about 45 years- but only quilting for about 4 months. Talk about the "aha!" moment...it never occurred to me to move the needle to get the scant 1/4 inch!! Thanks for the tip!

    ReplyDelete
  13. I have a 1/4" foot that came with my machine and I couldn't live without it. It gives me the perfect seam allowance every time. For those who don't have one, it is definitely worth the investment.

    ReplyDelete
    Replies
    1. Unless you move your needle position, it probably still will not be a 'scant' 1/4". I used to figure that as long as I was consistent, it was OK. But using the scant 1/4" seam really does make a difference.

      Delete
  14. My 1/4" foot was only $5 -- and well worth it because I can't move my needle either (a Janome mechanical). BUT . . . you have to check your seam regardless, because the first 1/4" foot I bought was defective -- nowhere NEAR a scant 1/4". I had to exchange it for one that was right.

    ReplyDelete
  15. I SO wish I had known this before I started the quilt I'm currently working on. I had no idea what it meant and was just eyeballing it, so now I've got wonkiness. Thank you for clearing that up for me!

    ReplyDelete
  16. Thanks for this info! I used to use the right side of my foot, then I switched to the inside of the right side of my foot which was a 1/4 in. That'll be so much easier if I just move the needle. GENIUS!

    ReplyDelete
  17. @Annabella - I don't have a return email address to respond to your comment, so I'm hoping you'll see it here:

    So nice that your machine came with a 1/4" inch foot. I would just sew a seam and measure it with a ruler to check and see if it's a scant 1/4". If not, the masking tape is definitely another good option.

    ReplyDelete
  18. Thanks Amy! I love the idea of just moving my needle over a bit, instead of putting my fabric along a different seam line. Great idea!

    ReplyDelete
  19. It's amazing how that smidge helps when you sew!! Good advice!!

    ReplyDelete
  20. yes! this is genius!! I have a 1/4" foot but I don't think it's genuine bernina because it doesn't fit my machine well and it's super slippery. I think i'm going to ditch it and start doing this. you just changed my life!!

    PS - do you have an Bliss laying around?

    ReplyDelete
  21. I think you just solved all my problems and made all of my wildest dreams come true. Move the needle! *smacks forehead* Now why didn't I think of that? ('cause I'm not you, that's why!) THANK YOU!

    ReplyDelete
  22. My blocks are always much more accurate if I use a scant 1/4" -- I love it!

    ReplyDelete
  23. Only yesterday the exhibition of the hobby of Rome, I discovered the basics of quilters. It 'nice to see how much passion and love are created these masterpieces. Congratulations you are very good! I follow you always with pleasure. Hello!

    ReplyDelete
  24. You know, I have read so many blogs that talk about using a 1/4" seams and I really didn't get it until I saw your visual. I had been trying to figure out exactly where is the scant? lol Thanks for the visual!

    ReplyDelete
  25. Wow, I just had an 'aha' moment. I've heard people talk about scant 1/4" seams but never really got it. Thanks so much for the visual, that's exactly what I needed!

    ReplyDelete
  26. Thanks for sharing this! I know that's it's better to use a scant 1/4", but it never occured to me how simple it would be to achieve it. duh.

    ReplyDelete
  27. Thanks for the tip- I'm going to measure mine and see how accurate it is.

    ReplyDelete
  28. THANK YOU!! I spent SO much time last quilt measuring twice over and STILL not having the seam allowances right. I can't wait to try this tip!

    ReplyDelete
  29. OMG!!! I'm so glad I read this before I started my new project... it's my 3rd quilt and I did as best I could with the first two... just wanted to tell you that I'm 2 blocks in and I can tell the difference in how the pieces are going to fit together. Thanks for the explanation and hint... although my needle only moves to the left so I feel backwards. :o)

    ReplyDelete
  30. You know, I've been quilting for 6 years and it took going to the Summit for me to FINALLY measure it up and resign myself to adjusting my needle position every time I turn on my machine to get the scant 1/4". WHAT a Difference!! Funny you should post this like 3 days after I finally saw the light!

    ReplyDelete
  31. Thank you for the visual! I have a new Janome that comes with a 1/4" foot. I checked it before I started a new quilt & still is bigger than a 1/4" if I go by the guide. I had to move my needle over to the right & I'm going by the 1/4" mark on by extension table for right now.

    ReplyDelete
  32. Thanks for the tip! I've been using the edge of my foot and some of my blocks aren't turning out correctly. Maybe this will help me.

    ReplyDelete
  33. It's good to hear you say this Amy! I recently realized that my Singer's 1/4" measurement is more than that! I'm working on the Swoon quilt right now and find my HST aren't quite large enough so I'll definitely be switching to the scant measurement. Thanks!

    ReplyDelete
  34. I just found this and wanted to thank you so much for explaining it so perfectly ... I didn't even know I could move my needle! Now I know the exact number to program it to to get the perfect seam!

    ReplyDelete
  35. Excellent advice! I have used a scant 1/4" for years and it does make a difference.

    ReplyDelete

Thank you so much for your comments - they make my day! I try to respond to as many as my 'mommy' time allows, but life sometimes gets in the way. Please know how much I appreciate each of them.

I apologize for the current comment settings that require a registered user account. They are the only way that I don't get tons of gross spam. I'm hoping Blogger will make a way where people who are not registered users, but would like to leave a comment can do so. Please, Blogger! In the mean time, thanks for your patience.

I also love to respond to questions. If you are a no-reply blogger, please leave an email address so I can get back to you. Or you can email me directly: amy @ diaryofaquilter.com. Thanks!