Tutorial originally shared on the Riley Blake Design blog, but I am reposting here in case you missed it.
I suddenly have had a lot of friends and family have babies in the past months, and I feel very behind on my baby-quilt-giving. But I do seem to have an (over)abundance of adorable fabric on hand that needs a loving home and someone to spit-up on it. So rather than get further behind, I’ve been creating very simply-pieced panel type quilts using strips of fabric to create a simple embellishment.
With so many great large scale fabrics available, you can create a simple baby quilt, letting the design motifs do all the work for you. Or by adding a simple monogram embellishment you can both personalize the quilt and give the quilt added design detail.
This tutorial will show you two variations on this design to create a 41″ x 54″ crib-sized quilt.
Supplies for Quilt 1:
Supplies Quilt 2 (with stripe):
- 1 3/8 yard fabric for front (I used Mystique Black Petal)
- 1/6 yard fabric for stripe (I used Mystique Gray Stripe)
- 1 5/8 yard cotton fabric for back (I used 60″ wide minkie and needed 1 3/8 yards)
- fat quarter for circle (I used Peony)
- fat quarter for letter (I used Charcoal)
- 1/2 yard for binding (I used Charcoal)
Cut a 15″ circle out of thin cardboard. (Cereal boxes work perfectly.) From your circle fabric, use the 15″ template as a guide and cut a circle at least 3/4″ bigger than template all the way around. (Hint: If you are working with a light colored circle fabric that will go on top of a dark, patterned background fabric, you may want to use interfacing so that the patterned fabric will not show through when you applique the circle to the front.)
Using a needle and sturdy thread, sew a large running stitch all the way around the circle, about 1/4″ away from the edge. Carefully pull thread to gather edges around the cardboard edge.
Bring circle to your ironing board and spray edges with starch. (You may want to put a dish cloth on your ironing board so your cover doesn’t get gucked up with starch.) Press the edges so that you have a nice, clean edge all around your circle. Don’t remove cardboard yet.
To create your monogram, choose a font on your computer and increase the font size so that it’s about 10″. Print the letter. (Hint: using a bold, chunky font is easier to work with. Ask me how I know this.) Using Wonder Under (the thinnest, lightest kind), trace the letter onto the paper side in the reverse. (You might want to tape your letter backwards to a window or light box and then trace letter backward.) Fuse Wonder Under to the back side of your monogram fabric.
Cut out monogram and peal off paper side of the Wonder Under. Carefully center letter on top of your circle and iron into place. Remove card board and take monogram to your sewing machine to either top stitch or satin stitch around the raw edges.
Take your pressed monogram circle and place it where ever you desire on your top fabric. (I chose about 3/4 of the way down and 1/4 of the way from the right side.) Carefully pin in place.
Carefully top stitch around the outside edge of the circle.
To create the quilt top with the “stripe” you will cut your main print into two pieces: One measuring 36″ and the other measuring 13″. From your “stripe” fabric, cut a piece 6.5″ (6″ if you only bought 1/6 yard – either is fine). Sew the stripe fabric between the 36″ and the 13″ piece using 1/4″ seams.
Use the same method as above to create the circle monogram. On this one I satin-stitched around the letter because it was thinner and needed more reinforcement.
Once your monogram is in place, square off the selvage edges plus about 1/2″ of the front side of your quilt. This will help when you go to create your quilt sandwich with the front, back and batting, the backing fabric will be visible from the front on all four sides.
Then quilt the top as desired. These two quilts were quilted for me by Melissa Kelley. We decided to use the chevron as a guide for the quilting on this one, but changed the look in the circle to reemphasize the monogram. I love the pebble quilting she chose.
When the quilting is done, square off the batting and binding fabric to prepare the quilt for binding. Cut 5 strips 2 1/2″ wide from your binding fabric and sew them together end to end. Binding tutorial here.
And there you go! A quick project for your new favorite baby. And as pictured above, you could just use pretty fabrics from your stash and create a simple, quilted baby quilt without the monogram. Easy peasy. Put that fabric to work!