A quick, simple tutorial for a 12″ (12.5″ unfinished) heart quilt block.
I used four different 1/4 yard cuts to create my three 12″ blocks. (The fabrics are from Cosmo Cricket’s Chemistry collection.)
Cutting requirements per 12″ finished block
- (2) 3.5″ x 6.5″ rectangles
- (3) 3.5″ x 6.5″ rectangles
- (4) 3.5″ squares
- (4) 1.5″ squares
- (1) 4″ squareFabric C
- (1) 3.5″ x 6.5″ rectangle
- (6) 3.5″ squares
- (1) 4″ square
1 – From Fabric B take (4) 1.5″ squares and (2) 3.5″ squares and draw a single diagonal line on the back of each. Place them on top of the (2) fabric A 3.5″ x 6.5″ rectangles as pictured above and sew them in place directly ON the drawn line. Carefully trim excess fabric 1/4″ away from the seams as pictured above.2 – Press seams open to create blocks as shown. Carefully sew 2 rectangles together. Press this seam open.
3. Take (2) Fabric C 3.5″ squares and draw a single diagonal line on the back. Place them on top of the bottom half of (2) Fabric B 3.5″ x 6.5″ rectangles. Sew seam directly ON the drawn line and rotary cut off excess fabric.
Press Blocks open to look like this.
4 – Create (2) Flying Geese blocks using opposite prints from Fabrics B and C. Draw diagonal lines on the back of (2) Fabric B 3.5″ squares and (2) Fabric C 3.5″ squares.
Line up a 3.5″ Fabric B 3.5″ square on the right side of a Fabric C 3.5″ x 6.5″ rectangle and sew seam directly ON the drawn line. Repeat with a Fabric C 3.5″ square placed on a Fabric B 3.5″ x 6.5″ rectangle. Carefully trim off excess fabric and press sides open.
5- Repeat using 3.5″ squares placed on 3.5″ x 6.5″ rectangles on opposite sides. Sew seam along line, trim excess fabric and press open sides to create two flying geese units.
6. Match up Fabric B and C 4″ squares right sides together. Draw a diagonal line on the back of the lighter fabric. **This step is different than previous seams!** Sew a seam 1/4″ away along BOTH SIDES of the diagonal line then rotary cut right on the line.
7 – Press both units open and square-off the excess fabric to be exactly 3.5″ squares.
8 – Using all of your assembled units and the remaining Fabric C 3.5″ squares layout the block to look like this. Assemble the units in three rows and then carefully sew the rows together.
And voila- a big heart-shaped quilt block.
Be sure to check out the Sew Red for Women blog for the other 8 blocks so far and a little extra motivation to take care of your own heart.
(This block originally created for the Sew Red for Women blog hop.