Hello friends! Today I’m going to share a simple quilted Christmas Stocking tutorial. This method is quick and super easy (I promise!) and a great way to use up your favorite fabrics or scraps. Using fat quarters, these stockings finish at 17″ x 6″, but you could enlarge or reduce the pattern and make the stockings any size you like, using the same method. This quilt-as-you-go method will give you some nice weight and texture as well.
For this project, I used a bunch of gorgeous Art Gallery Fabrics from various collections. This pattern is also perfect for using left over stringy-scraps!
Stocking Fabric requirements (per stocking):
- Lining – 1 Fat Quarter
- Backing – Fat Quarter
- Front – assorted fabric strips
- Batting scrap 9″ x 20″
Gather 15-18 fabric strips at least 8″-9″ long and various widths.
Trim batting scrap to slightly larger than the stocking pattern.
“Audition” fabric strips in the order you like before you start sewing. Remove strips except middle two strips, but keep them in the planned order.
Christmas Stocking Tutorial – Assembly
Place middle strip in place on the batting and pin adjacent strip right sides together.
Sew strips together (and to batting) using 1/4″ seam allowance. If you have a walking foot, I suggest using it. Press strips open.
Continue adding fabric strips using the same method of sewing right sides together, then press open. (Pressing will help keep your fabric strips neat.) When all strips are sewn to batting you can quilt by stitching over the fabric strips at whatever density you prefer. I just eyeball the lines using the stripes as my guide.
Lay stocking pattern over quilted piece and cut stocking front trimming off 1″ at the top. Cut a backing piece facing the opposite direction from the front also minus 1″ from the top. (This will allow for the trim to show at the top of the stocking. If you’d prefer not to have the solid trim, you can leave the front the same height as the lining.)
You will now have a front, back and two lining pieces.
Match up the pieced front with a lining right sides together (toes pointing the same direction) and a back and lining piece right sides together. Sew top edges together using 1/4″ seam allowance. Press seams open. Match up two new pieces with lining pieces right sides together and front/back right sides together. Sew all the way around matched pieces using a 1/4″ seam allowance and leaving a 4″ opening in the lining.
Before turning right sides out, trim fabric close to seam allowance on the lining pieces and clip curves of the outside portion of the stocking. Turn right side out and topstitch lining gap closed. Tuck stocking lining inside the stocking, leaving the top of the lining sticking up 1/4″ to create contrasting trim. Carefully shape and press the stocking, esp the top edge (see below).
To create a hanging loop, cut a scrap 1.5″ x 6″. Fold in half and crease. Open and fold sides into the crease. Press. Fold in half again and top stitch open sides closed. Fold loop in half and pin to the inside of the back seam of the stocking. Sew it in place at the same time you top-stitch the top edge of the stocking. I top stitch at the top and bottom of the ‘trim’ to give it a finished look.
And that’s it! You’re done. You could even do the same pattern and just make ‘solid’ fronts for your stockings.
Looking for other ideas for handmade Christmas Stocking tutorials? Check out this list of some of my favorites!